Sharp FO-2970M Service Manual page 13

3. How to make soft switch setting
To enter the soft switch mode, make the following key entries in sequence.
Press FUNCTION
S F T S W 1 = 0 0 0 0 0 0 0 0
S F T S W 1 = 1 0 0 0 0 0 0 0
S F T S W 1 = 1 0 0 0 0 0 0 0
S F T S W 1 = 1 0 0 0 0 0 0 0
S F T S W 1 = 1 0 0 0 0 0 0 0
S F T S W 2 = 0 0 0 0 0 0 0 0
S F T S W 65 = 0 0 0 0 0 0 0 0
9 8 7
The soft switch mode is terminated.
2 – 9
START 0 1 START
Press FUNCTION key.
Press key.
Press key.
Bit1 - 8 are set.
Press START key during setting.
Soft SW2 - 65 are set.
To finish the settings halfway between
SW 1 and SW65, press the STOP key.
In this case, the setting being done to
the SW No. on display will be nullified
while settings done to the preceding
SW Nos. remain in effect.
FO-2970MU