To Remove The Wirework Runners; Cleaning The Shelves, Wirework Runners And Oven Furniture; Care Of Stayclean Surfaces; The Oven Cleaning Cycle - Parkinson Cowan U03059 Owners Handbook And Installation Instructions

TO REMOVE THE WIREWORK
RUNNERS
The wirework runners in all compartments can
be removed for cleaning.
1. Remove all shelves and furniture from the
compartment.
2. Hold the wirework at the bottom and gently
pull towards the centre of the grill / oven.
3. Unhook the runner at the top and remove it
from the cavity.
4. To replace, hook the wirework back into the
oven sides.
Ensure that the wirework runners are
firmly in place before refitting the oven
shelves.
CLEANING THE SHELVES,
WIREWORK RUNNERS AND OVEN
FURNITURE
Soak the oven shelves, plate rack, wirework
runners and grilling grid in hot water to which a
little washing up liquid has been added. If the
shelves are heavily soiled a soap impregnated
steel wool pad can be used.
The grill pan, grill deflector, meat tin and trivet
can be cleaned using a soap impregnated steel
wool pad.
All items of grill and oven furniture are
dishwasher safe with the exception of the grill
pan handle.
CARE OF STAYCLEAN
SURFACES
During normal use the Stayclean coating in the
Top and Ultra Fan ovens will become splashed
with fats and food residues. By running the
oven without food, the Stayclean surfaces burn
off any soilage. Regular use of the oven
cleaning cycle will help to keep the panels in
good condition.
Damage will occur if soap impregnated steel
wool pads, aerosol cleaners or any abrasive
cleaners are used.

THE OVEN CLEANING CYCLE

The Top and Ultra Fan ovens may be cleaned
using the cleaning cycle. The ovens should be
cleaned separately.
1. Remove oven shelves, wirework runners and
bakeware from oven.
2. Turn the required oven temperature control to
220°C and allow the oven to run for an hour
or so.
32
Cavity side