Subaru 2013 Legacy, 2013 Outback Owner's Manual page 65

1-36
Seat, seatbelt and SRS airbags
instructions by the child restraint system
manufacturer.
Since a top tether can provide additional
stability by offering another connection
between a child restraint system and the
vehicle, we recommend that you use a top
tether whenever one is required or avail-
able.
! Tether anchorage location
! Legacy
Three tether anchorages are installed on
the rear shelf behind the rear seat head
restraint. Open the cover flap to use each
anchorage.
! Outback
Three tether anchorages, i.e., ones for the
right, center and left positions, are already
installed on the rear edge of the roof.
Open the cover flap to use each ancho-
rage.
! To hook the top tether
CAUTION
. Always remove the head restraint
when mounting a child restraint
system with a top tether. Failure
to do so may prevent the top
tether from being fastened
tightly.
. Avoid placing the head restraint
that has been removed in the
passenger compartment to pre-
vent it from being thrown around
in the passenger compartment in
a sudden stop or a sharp turn.
! Legacy
1. Fold down the rear seatback for the
window side seating position. Refer to
Folding down the rear seatback F1-11.