Cruise Control Indicator Light; Cruise Control Set Indicator Light; Headlight Indicator Light; Clock - Subaru 2013 Legacy, 2013 Outback Owner's Manual

3-32
Instruments and controls
&
Cruise control indica-
tor light
This light illuminates when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to To set cruise control F7-40.
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illumi-
nates, the cruise control indicator
light flashes at the same time. At
this time, avoid driving at high
speed and have your vehicle in-
spected at a SUBARU dealer as
soon as possible.
&
Cruise control set in-
dicator light
This light illuminates when vehicle speed
has been set to use the cruise control
function.
&
Headlight indicator
light
This indicator light illuminates under the
following conditions.
. when the light switch is turned to the
or position
. when the light switch is in the AUTO
position and the headlights illuminate
automatically
&
Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.

Clock

NOTE
Your SUBARU dealer can change the
settings of activating/deactivating the
automatic adjustment of the clock by
the GPS (Global Positioning System)
(for models with the genuine SUBARU
navigation system). Contact your
SUBARU dealer for details.
The clock shows the time while the
ignition switch is in the Acc or ON
position.
To adjust the time shown by the clock,
press the + button or the − button. If
you press the + button, the indicated
time will change in one-minute incre-
ments. If you press the − button, the