Subaru 2013 Legacy, 2013 Outback Owner's Manual page 398

6. Insert the electronic parking brake
release tool into the cap of the parking
brake release device.
7. Remove the cap of the parking brake
release device by turning the electronic
parking brake release tool counterclock-
wise.
8. Break the white film and insert the
electronic parking brake release tool into
the parking brake release device.
9. Turn the electronic parking brake
release tool clockwise approximately 200
to 250 rotations.
10. To confirm that the electronic parking
brake is released, shift the shift lever or
the select lever to the N position, slightly
move the tire stops and have someone
push the vehicle slightly while you remain
in the driver s seat. If the vehicle moves,
the electronic parking brake has been
released.
11. Readjust the tire stops.
12. Reinstall the cap to the parking brake
release device.
In case of emergency
CAUTION
. Do not turn the electronic parking
brake release tool counterclock-
wise or turn it around more than
300 times. Doing so may result in
a malfunction of the electronic
parking brake.
. Do not use electric power tools to
turn the electronic parking brake
release tool. Doing so may result
in a malfunction of the electronic
parking brake.
9-19