Subaru 2013 Legacy, 2013 Outback Owner's Manual page 282

TUNE dial.
To turn on the Hands-free power when the
Hands-free power is OFF, perform either
of the following procedures.
Press the talk switch
Turn on .
Select Turn on by operating the
TUNE dial.
! System setup
After selecting the SYSTEM SETUP
menu, perform the following procedure.
You can select the following menus only
by operating the TUNE dial.
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select the GUIDANCE VOL (type A
audio)/ Guidance Volume (type B audio)
menu.
2. Set the guidance volume by operating
the TUNE dial.
! Initializing the registered data
To initialize the registered data, perform
the following procedure.
1. Select the INITIALIZE (type A audio)/
Reset Settings (type B audio) menu.
2. Select the CONFIRM (type A audio)/
Confirm reset settings? (type B audio)
menu.
INITIALIZED (type A audio)/ Set-
tings have been reset. (type B audio)
is displayed, the registered data is
and say
initialized and the mode changes to
the last mode.
! Selecting language
To select the language, perform the
following procedure.
Type A audio:
1. Select the SEL LANGUAGE menu.
2. Select the desired language by oper-
ating the TUNE dial.
Type B audio:
HD/TEXT button
1. Press and hold the HD/TEXT button
to select Select Langu menu.
2. Select the preferred language by
operating the TUNE dial.
! Device name function (type B audio)
Select the Device Name menu to show
the device name and BD address of the
audio.
5-65
Audio