Subaru 2013 Legacy, 2013 Outback Owner's Manual page 275

5-58
Audio
3. Transfer the data from the cell phone.
For details about transferring the data,
refer to the instruction manual of the cell
phone.
NOTE
For type B audio, you can select the
data to be registered by performing
either of the following procedures until
the preferred data is displayed.
. Press the talk switch
"Previous" or "Next".
. Operate the "TUNE" dial.
4. Select the phone number to be regis-
tered by operating the TUNE dial.
5. Perform either of the following proce-
dures.
Select the RECORD NAME menu
by operating the TUNE dial.
Press the talk switch
6. Say the name (voice tag) to be
registered.
7. Select the CONFIRM menu.
The phone number is then regis-
tered and STORED (type A audio)/
Phone number stored. (type B audio)
is displayed.
! Registering by inputting manually
1. Select the MANUAL INPUT menu by
operating the TUNE dial.
2. Input the phone number to be regis-
tered.
3. Perform either of the following proce-
dures.
Select the RECORD NAME menu
by operating the TUNE dial.
Press the talk switch
4. Say the name (voice tag) to be
registered.
5. Select the CONFIRM menu.
and saying
The phone number is then regis-
tered and STORED (type A audio)/
Phone number stored. (type B audio)
is displayed.
NOTE
While inputting the phone numbers, if
"GO BACK" is chosen using the
"TUNE" dial, the character that was
.
input last is deleted.
! Registering from call history
1. Select the CALL HISTORY menu.
2. Select one of the following menus.
INCOMING or OUTGOING (type
A audio)
Incoming Call History or Outgoing
Call History (type B audio)
3. Select the phone number by operating
the TUNE dial.
4. Select the CONFIRM menu (type A
audio).
5. Perform either of the following proce-
dures.
Select the RECORD NAME menu
by operating the TUNE dial.
. Press the talk switch
6. Say the name (voice tag) to be
registered.
7. Select the CONFIRM menu.
The phone number is then regis-
tered and STORED (type A audio)/
Phone number stored. (type B audio)
is displayed.
! Registering from redial
1. Select the REDIAL menu.
2. Select the phone number by operating
the TUNE dial.
3. Select the STORE menu.
4. Select the CONFIRM (type A audio)/
Confirm store number? (type B audio)
menu.
5. Perform either of the following proce-
dures.
Select the RECORD NAME menu
by operating the TUNE dial.
Press the talk switch
6. Say the name (voice tag) to be
registered.
.
.