Replacing the MXM graphics card
9. Close the system bay.
10. Refer to "Completing the installation".
To replace the MXM graphics card
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Open the system bay. Refer to step 2 of the "Replacing the hard disk
drive" section.
3. Remove the heat sink. Refer to steps 3 to 5 of the "Replacing the MXM
heat sink" section.
WARNING
The heat sink becomes very hot when the system is on. Never touch
the heat sink with any metal or with your hands.
4. Remove the two screws that secure the MXM graphics card to the
chassis.
Chapter 7. Replacing hardware
53