6. Remove the two screws that secure the wireless keyboard and mouse
receiver module to the metal bracket.
7. Remove the wireless keyboard and mouse receiver module.
8. Align the two screw holes on the wireless keyboard and mouse
receiver module to the two mounting holes on the metal bracket.
9. Screw back the two screws on the new wirelesskeyboard and
mousereceiver module.
10. Connect the wireless keyboard and mouse receiver cable to the
wirelesskeyboard and mousereceiver module.
11. Place the metal bracket on the chassis aligning the screw hole on the
metal bracket to the mounting hole on the chassis.
12. Screw back the screw on the metal bracket.
13. Close the system bay.
14. Refer to "Completing the installation".
Chapter 7. Replacing hardware
45