Hardware Maintenance Manual
Replacing the MXM fan
42
5. Align the two screw holes on the new CPU fan to the two mounting
holes on the system bay.
6. Insert and tighten the two screws to secure the CPU fan.
7. Connect the CPU fan cable to the system board.
8. Close the system bay. Refer to step 9 of the "Replacing the hard disk
drive" section.
9. Refer to "Completing the installation. "
To replace the MXM fan
1. Remove the computer cover. Refer to "Removing the computer cover. "
2. Open the system bay. Refer to step 2 of the "Replacing the hard disk
drive" section.
3. Remove the two screws that secure the MXM fan to the system bay.
4. Disconnect the MXM fan cable from the system board (1) and pull the
MXM fan away from the system bay (2).