Replacing the wireless keyboard and mouse receiver module
5. Align the two screw holes on the new MXM fan to the two mounting
holes on the system bay.
6. Insert and tighten the two screws to secure the MXM fan.
7. Connect the MXM fan cable to the system board.
8. Close the system bay. Refer to step 9 of the "Replacing the hard disk
drive" section.
9. Refer to "Completing the installation. "
To replace the wireless keyboard and mouse receiver
module
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Open the system bay. Refer to step 2 of the "Replacing the hard disk
drive" section.
3. Remove the screw that secures the metal bracket to the chassis.
Chapter 7. Replacing hardware
43