Table of Contents
Advertisement
a.
Align the cover with the guide track on the computer case, then slide the cover in.
b.
Push the cover till it's locking position.
c.
Press down the locking fin to secure the top cover.
Step 8.
Reattach the computer cover.
Replacing a graphics card
Note: For this procedure, it helps to lay the computer on a flat, stable surface.
To replace a graphics card:
Step 1.
Remove the computer cover. Refer to "Removing the computer cover".
Step 2.
Push the graphic card lock as shown to unlock the graphic.
Step 3.
Disconnect the power cables from the graphics card.
Step 4.
Turn the locking pin counterclockwise 90°, then slowly take it out.
Step 5.
Push the locking pin that locks the graphic card to the motherboard
5
to remove it.
Step 6.
To install the new graphics card:
a.
Attach the new graphics card to the same adapter connector.
b.
Connect the power cables to the new graphics card.
c.
Turn the graphics card latch to the closed position and secure it with the locking pin.
Step 7.
Reattach the computer cover.
1
2
3
4
, then lift the card straight up
.
Chapter 8
41
Replacing hardware
Advertisement
Table of Contents
