Replacing The Power Cord Or Power Adapter; Replacing The Remote Control - Lenovo 30113RU - IdeaCentre A600 - 3011 Hardware Maintenance Manual

Hardware Maintenance Manual

Replacing the power cord or power adapter

Replacing the remote control

82
To replace the power cord and power adapter:
1. Remove any media (diskettes, CDs, or
shut down your operating system, and turn off all attached devices
and the computer.
2. Locate the connector for the power cord. Refer to "Rear view".
3. Disconnect the failing power cord and adapter from the computer and
connect the new power cord and adapter to the same connector.
4. Refer to the "Completing the installation".
Note
YRemove the batteries from the failing remote control before you
return it to Lenovo for a replacement.
memory cards) from the drives,