Lenovo 30113RU - IdeaCentre A600 - 3011 Hardware Maintenance Manual page 78

Hardware Maintenance Manual
76
9. Carefully detach the LCD panel from the chassis.
10. Place the new LCD panel to the chassis.
Attention
Use an anti-electrostatic cloth to clean the LCD panel before installing
it to the chassis. You may dip a little alcohol if the LCD panel is dirty.
11. Screw back the four screws on the left and right side of the LCD panel.
12. Install the LCD bezel. Refer to steps 11 to 13 of the "Replacing the
touch sensor board" section
13. Close the system bay.
14. Refer to "Completing the installation".