Replacing The System Fan - Lenovo 10S6001AIX Maintenance Manual

Figure 44. Installing the cover presence switch into the bracket
Figure 45. Installing the cover presence switch and the bracket
9. Connect the new cover presence switch cable to the system board.
10. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 58.

Replacing the system fan

Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 18.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 24.
4. Remove the system board shield. See "Replacing the system board shield" on page 25.
5. Remove the VESA mount bracket. See "Replacing the VESA mount bracket" on page 26.
6. Disconnect the system fan cable from the system board.
7. Replace the system fan.
.
Chapter 4 Replacing hardware
31