Cotton Stand - Brother T-8420B Instruction Manual

Place the cord securely
into the notch.
Place the cable tie
against the inside of
the box.
T-8420B, 8450B, 8720B, 8750B
13. Alarm display
(semi dry type)
(1) Alarm display
(2) Screws [2 pcs]
(Use for tightening rear cover)
2975M
(3) Screws [4 pcs: removed]
(4) Connector
After connecting the connector (4) to
connector <CN1> on the P.C.B. of the
alarm display (1), return the alarm
display (1) to its original position and
then tighten the screws (3).
2976M

14. Cotton stand

(1) Cotton stand
NOTE:
Securely tighten the nut (4) so that
the two rubber cushions (2) and the
washer (3) are securely clamped and
so that the cotton stand (1) does not
move.
2878M
4. INSTALLATION
10