Configuring additional roaming client support for roam servers
Table 6-2
lists and describes each registry value.
Table 6-2
Roaming client registry values
Value
ProductControl\RoamQuarantine
ProductControl\RoamAlerts
ProductControl\RoamManagingParent
Level0
ProductControl\RoamManagingGRC
Level0
ProductControl\RoamManaging
QuarantineLevel0
ProductControl\RoamManagingAlert
Level0
For information on using the configurations file, see the Symantec AntiVirus
Reference Guide.
To configure a Symantec AntiVirus server for additional roaming options, you
must complete the following tasks:
Enable roaming and roll out the hierarchical list of servers to each roam
■
server using RoamAdmn.exe, which is located on Disk 1 in the AdmTools
folder.
Optionally configure additional load balancing, failover, and alternate
■
Symantec AntiVirus servers.
See
"Configuring roaming client support options from the Symantec
System Center console"
Description
1: Enable Central Quarantine roaming.
0: Disable Central Quarantine roaming
(default).
1: Enable Alert server roaming.
0: Disable Alert server roaming (default).
List of parent servers to check for
proximity.
List of GRC servers to check for proximity.
List of Quarantine Servers to check for
proximity.
List of Alert servers to check for proximity.
on page 184.
Managing roaming clients
Implementing roaming
187