Table of Contents
Advertisement
Installing the Cooker
Safety warnings about installation
•
The cooker MUST be installed and serviced by a qualified technician.
•
A Certificate of Compliance MUST be supplied to be kept by the customer.
•
The packing materials MUST be removed before you install the cooker.
•
You MUST follow the installation instructions in this booklet.
•
The surrounding kitchen cabinets MUST be able to withstand 85 C.
Electrolux Products WILL NOT accept responsibility for damage caused by installation into kitchen cabinets
which cannot withstand 85 C.
•
The appliance MUST be installed using the flexible hose supplied.
•
The vents, openings and air spaces MUST not be blocked or covered.
•
You MUST not pull the cooker by the door handles or the splashback.
•
The cooker MUST be checked every five years.
Locating the cooker
Study the diagrams below to be sure of the dimensions required to locate the cooker safely.
NOTE: Make sure that the top of the hotplate surface is at least 10 mm higher than the level of the benchtops.
IMPORTANT: Before you cook in your new oven it is important that the protective oils used in the manufacture of the
product be removed.
•
Make sure that the room is well ventilated (to allow smoke to escape).
•
Run the grill on high for 15 minutes.
•
Then run the oven on 220 for 4-8 hours.
19
Advertisement
Table of Contents
