Installation; Installing The Wine Cooler / Beverage Center - Electrolux EI24WC65GS Use & Care Manual

Installing the Wine Cooler / Beverage Center

Your Electrolux wine cooler / beverage center has been designed for either free-standing or built-in
installation. When built-in, your wine cooler does not require additional air space for top, sides or rear. In
either case, the front grille must NOT be obstructed.
NOTE
To ease unit installation and removal, it is recommended that the cabinet rough opening dimensions be
increased by at least ¼ inch over the dimensions given for your unit.
NOTE
All units require zero clearance when installed flush with a cabinet or wall. Electrolux stainless steel
models require a minimum 2⁷⁄₈ inch handle clearance when installed against a wall or cabinet that
extends beyond the front edge of the unit.
23 5/8"
34-5/16"
Adjustable to
35"
Unit Dimensions
Width Height
23 / inch 34 / - 35 inches
13 5
16 16
47"
2 7/8"
Top
View
26 3/4"
24 1/4"
21 9/16"
Side
View
2 3/4"
Product Dimensions

Installation

Depth
26 / inch
3
4
23 13/16"
Front
View
3 5/16"
5