Table of Contents
Advertisement
Installing more than one Frontline hob
Additional parts: cross bar(s), heat resist-
ant silicon, rubber block, shaving blade.
Only use special heat-resistant silicon.
3
Installing more than one appliance
1. Work out the size of the cut-out section
and saw it out.
2. Remove Frontline strip from the appli-
ances by hand (magnetic fastening).
6. Put silicon on the appliance corners that
will touch one another. Put silicon on the
end of the cross bar.
Cut-out section
Distance from the wall: at least 50 mm
Depth:490 mm
Width: The widths of all appliances to be
built-in are added together, minus 20 mm
(see also "Overview of all appliance widths")
Example:
3.
Lay the appliances one at a time on
something soft (for example a blanket)
with the underside facing upwards.
4.
Screw / clip fixing plates / retaining grips
into the appropriate holes in the protec-
tive boxes.
5.
Place first appliance in the cut-out. Lay
connecting cross bar in the cut-out and
push up halfway against the appliance.
electrolux 19
Advertisement
Table of Contents
