Table of Contents
Advertisement
58 Integrating Symantec Mail Security with Symantec Security Information Manager
Installing and configuring event logging to the Information Manager
Installing the Collector
Configuring data sources
gunzip Unix.tar.gz
tar xvf Unix.tar
4
Navigate to the decompressed
program with the command
./install.sh [ -debug ] [-log] [-a{ProdID}] [-f{filename}] [-
s{server}] [-p{port}] [-i{installpath}]
where
specifies the hostname or IP of the management server, and
-s{server}
-i{install path}
will be installed. If you omit this parameter, the SSIM Agent will be installed
in the default folder.
(example:
./install.sh -i/opt/Symantec/sesa/Agent
)
-s192.168.0.10
The installer runs and completes.
To install the Collector on Windows
1
Ensure that you are logged into the Symantec Mail Security for SMTP
machine on the console or via SSH as an administrative user.
2
Insert the Symantec Mail Security for SMTP product CD into the drive and
execute the following command from the product CD:
\collectors\sms_smtp\install\install.bat
You can view the installation logs in
Information Manager Agent folder.
To install the Collector on Linux/Solaris
1
Ensure that you are logged into the Symantec Mail Security for SMTP
machine on the console or via SSH as root.
2
Insert the Symantec Mail Security for SMTP product CD into the drive and
execute the following command from the product CD:
/collectors/sms_smtp/install/install.sh
You can view the installation logs in
You must configure the following data sources on the Information Manager to
receive events from Symantec Mail Security for SMTP. You can add a new
sensor for each data source. Once you have configured these sources, you must
distribute the configuration to the Collector for it to take effect. For more
directory and launch the installation
AgtInst
specifies the destination path where the SSIM Agent
installcollector.log
/tmp/collector-install.log
in the
Advertisement
Table of Contents
