28 Installing Symantec Mail Security for SMTP
Installing on Solaris and Linux
Note: You can run the installer using an options file. For more information
about using an options file, refer to
2
Type
to proceed.
1
The license agreement is displayed.
3
Use the Enter key to page through the license agreement text.
4
Type
to accept the license agreement, then type
1
The Installation Type screen is displayed.
You can choose to install Symantec Mail Security for SMTP in the following
configurations:
Typical , which installs both the Scanner and Control Center on the
■
same machine in a location you specify, with subcomponents under
that location, or
Custom, which allows you to install a Scanner or the Control Center
■
individually, as well as specify locations for the MTA data and log
directories (if you are installing a Scanner), or the port number for your
Tomcat installation (if you are installing the Control Center).
5
Type the number of the option you want to select or deselect it, then type 1
to proceed.
The Installation Directory screen is displayed.
6
Specify an alternate location, or type
then type
to proceed.
0
The default value is
/opt/Symantec/SMSSMTP/
If you selected the default installation configuration in step 5, the
■
Installation Parameters Summary screen is displayed. Proceed to step
13.
If you selected the custom installation configuration in step5, the
■
Feature Selection panel is displayed. Proceed to step 7.
7
If you are installing both a Scanner and the Control Center, type
proceed, otherwise, type the number for the component you are not
installing to deselect it, and then type
8
If you are installing the Control Center only, proceed to step 12.
If you are installing a Scanner, the MTA Data Directory screen is displayed.
This is the directory used for message queue data. The default location for
this directory is
/opt/Symantec/SMSSMTP/mta
"Sample options file"
and then
0
to accept the default value, and then
1
to proceed.
0
on page 63.
to proceed.
1
to
0