Table of Contents
Advertisement
66
Integrating Symantec Mail Security with Symantec Security Information Manager
Installing and configuring event logging to the Information Manager
Installing the Collector
Configuring data sources
4
Navigate to the decompressed
program with the command
./install.sh [ -debug ] [-log] [-a{ProdID}] [-f{filename}] [-s{server}] [-p
where
specifies the hostname or IP of the management server, and
-s{server}
-i{install path}
be installed. If you omit this parameter, the SSIM Agent will be installed in
the default folder.
(example:
./install.sh -i/opt/Symantec/sesa/Agent-s192.168.0.10
The installer runs and completes.
To install the Collector on Windows
1
Ensure that you are logged into the Symantec Mail Security for SMTP machine
on the console or via SSH as an administrative user.
2
Insert the Symantec Mail Security for SMTP product CD into the drive and
execute the following command from the product CD:
\collectors\sms_smtp\install\install.bat
You can view the installation logs in
Information Manager Agent folder.
To install the Collector on Linux/Solaris
1
Ensure that you are logged into the Symantec Mail Security for SMTP machine
on the console or via SSH as root.
2
Insert the Symantec Mail Security for SMTP product CD into the drive and
execute the following command from the product CD:
/collectors/sms_smtp/install/install.sh
You can view the installation logs in
You must configure the following data sources on the Information Manager to
receive events from Symantec Mail Security for SMTP. You can add a new sensor
for each data source. Once you have configured these sources, you must distribute
directory and launch the installation
AgtInst
specifies the destination path where the SSIM Agent will
installcollector.log
/tmp/collector-install.log
)
in the
Advertisement
Table of Contents
