Symantec 10067161 - 10PK NORTON ANTIVIRUS Product Manual page 211

Norton AntiVirus adds to the Trust Control network
all the devices that you manually add to Network
Security Map. You can select the Trust Control network
in the Network Details drop-down list to view the
devices that you added. You can also edit the name of
the device.
w
You cannot edit the Trust Control network details.
To add a device to the Network Security Map
1 In the Norton AntiVirus main window, click
Advanced.
2 Under Network Protection, click Network Security
Map.
3 On the left side of the Network Security Map
window, under Total in Network, click the plus
symbol.
4 In the Add a Device window, in the Name box, type
the name of the device that you want to add to the
Network Security Map.
The maximum character length of the device name
is 15 characters.
5 In the IP or Physical Address box, type the IP
address or physical address of the device that you
want to add to the Network Security Map.
You can use the following formats in the IP or
Physical Address box:
IPv4 address
IPv6 address
Physical address
Resolvable host
The address that you provide is not verified until
the device is physically found on the network.
6 Click Add Device.
Protecting Internet activities
About the Network Security Map
172.16.0.0
fe80::12ac:fe44:192a:14cc
11-22-c3-5a-fe-a4
ftp.myfiles.com
211