Reenabling Lacp Suspend Individual - Cisco 7206 - VXR Router Configuration Manual

Configuring Port Channels
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Command
Step 4
no lacp suspend-individual
Example:
switch(config-if)# no lacp
suspend-individual
Step 5
no shutdown
Example:
switch(config-if) no shutdown
Step 6
copy running-config startup-config
Example:
switch(config-if)# copy running-config
startup-config
This example shows how to disable LACP individual port suspension on a port channel:
switch# configure terminal
switch (config)# interface port-channel 1
switch(config-if)# shutdown
switch(config-if)# no lacp suspend-individual
switch(config-if)# no shutdown

Reenabling LACP Suspend Individual

You can reenable the default LACP individual port suspension.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
interface port-channel number
Example:
switch(config)# interface port-channel 1
switch(config-if)
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
6-40
configure terminal
interface port-channel number
shutdown
lacp suspend-individual
no shutdown
copy running-config startup-config
Chapter 6
Purpose
Disables LACP individual port suspension behavior on
the port channel.
Brings the port channel administratively up.
(Optional) Copies the running configuration to the
startup configuration.
Purpose
Enters configuration mode.
Specifies the port channel interface to configure, and
enters the interface configuration mode.
Configuring Port Channels
OL-23435-03