Table of Contents
Advertisement
Chapter 11. Installing WePOS and POSReady for Models x4x
The Windows Embedded Point of Sale (WEPOS) and Windows Embedded
POSReady installation processes fully support the SurePOS 300. No special
considerations need to be made when installing either operating system. You can
use the following method to install the operating system. A USB
CD-ROM/DVD-ROM installation does not require any modifications in order to use
the WEPOS or POSReady packages.
Note: POSReady requires a DVD reader.
Requirements
v WEPOS or Windows Embedded POSReady package
v USB or PS/2 Keyboard and Mouse
v External USB CD-ROM (WEPOS) or external DVD-ROM (POSReady)
Configuring BIOS Setup
To configure BIOS setup, complete the following steps:
1. Power on the system and enter BIOS setup by pressing the DEL key during
2. Enter the Advanced BIOS Features menu.
3. Under the Boot Device selections, make the following changes:
Installing the Operating System
1. Power on the system and boot from the WEPOS or POSReady package.
2. Follow the prompts on the screen.
© Copyright IBM Corp. 2005
POST.
v First Boot Device = CD ROM
v Second Boot Device = Hard Disk
31
Advertisement
Table of Contents
Troubleshooting
