Installing The Operating System - IBM 4910-33S Installation Manual

Installing the Operating System

1. Insert Disk 1 into the USB floppy drive, and place the Operating System
2. Power on the system and boot from the Windows 2000 Professional disk.
3. Press <F6> when prompted to add the SATA mass storage driver. You may
4. Follow the prompts on the screen.
Note: You can also modify the TXTSETUP.SIF file on the CD Media as an
installation CD in the USB or IDE CD-ROM.
have to press <F6> several times for Windows setup to accept the keystroke.
alternate method of installation.
Chapter 2. Installing Windows 2000
7