Replacing The Mainboard - Acer TravelMate P633-V Service Manual

Replacing the Mainboard

1. Connect the DC input cable to the mainboard (a).
2. Connect the LAN cable to the mainboard (b).
3. With the mainboard at a 45 degree angle position the I/O ports of the mainboard to align
with the port holes of the lower case.
4. Lower the mainboard in place (c).
Note the following reminders:
 Make sure a RTC battery is installed on the mainboard.
 Check that the DC input cable is properly positioned on the top left corner of the lower
case.
5. Connect the DC in cable to the mainboard.
Figure 3-103. DC In Cable
6. Gently turn the mainboard on its side and place it into the lower case assembly.
Figure 3-104. Mainboard
Machine Maintenance
0
3-69