Removing the Mainboard
1. Perform the
"Removing the Palmrest Module/Upper
page 3-21.
2. Perform the
"Removing the RF Key Control
3. Perform the
"Removing the TPM
4. Release the LCD cable from the transparent tape securing it to the mainboard (1), then
disconnect the LCD cable from the mainboard (2).
Figure 3-40. LCD Cable Tape
5. Disconnect the speaker cable from the mainboard.
Figure 3-41. Speaker Cable
Machine Maintenance
Case" procedure described on
Module" procedure described on page 3-29.
Board" procedure described on page 3-30.
0
3-31