Removing the WLAN Module
1. Perform the
"Removing the Base
2. Unplug the two antenna cables from the WLAN module.
+
IMPORTANT:
For reference during machine reassembly, note which cable color
corresponds to the main (black) and auxiliary (white) connectors.
Figure 3-14. WLAN Module Antennas
3. Remove the screw securing the WLAN module to the mainboard.
Figure 3-15. WLAN Module Screw
Table 3-15. Screw
Step
WLAN Module Disassembly
Machine Maintenance
Door" procedure described on page 3-10.
Screw
M2 × L3.5
Quantity
Screw Type
1
0
3-15