HP MediaSmart Server User's Guide
2. Follow the instructions on the installation wizards.
The installation process is identical to installing on the first computer except for the following:
•
The Windows Home Server Setup does not run.
•
Your server password is required to install, as shown in the following figure:
To install the from the server using Windows XP or Windows
Vista
Note
If you are installing on a Windows Vista 64-bit operating system, you must have Windows Home
Server with Power Pack 1 installed. To check your version of Windows Home Server, double-
click the Windows Home Server icon
Resources in the sidebar of the Windows Home Server Settings dialog box.
1. At the computer, click Start, and then Run.
Type the following (UNC) network address:
\\HPSERVER\Software\Home Server Connector Software\setup.exe
The network address will be different if you renamed your server. In this case type,
\\<server name>\Software\Home Server Connector Software\setup.exe
2. Click OK.
Setting up Additional Computers
After installing the software on the Software Installation Disc, there are a few setup options for
you to consider.
•
The home computer is automatically set up to be backed up each night. If you want to customize
back up settings for this computer, see
•
If you created individual user accounts in Windows Home Server for one or more family members
that use this computer, you also need to set up computer user accounts for them if you want them
38
in the system tray. Click Settings, and then click
Computer
Backups.