HP EX485 - MediaSmart Server - 2 GB RAM User Manual page 238

HP MediaSmart Server User's Guide
•
Click Start, Control Panel and select Add or Remove Programs.
•
Click on HP MediaSmart Server, click Remove.
•
Click on Windows Home Server Connector, click Remove.
5. Prepare the server for recovery or reset:
•
On the back of the server, hold in the Power button for at least 4 seconds to force the
server to shutdown.
•
After the server is completely off, locate the recessed Status/Recovery button on the
front of the server and prepare to press this button with a paper clip.
•
On the back of the server, press the Power button to restart.
•
While the Health indicator is blinking aqua white
press the recessed Status/Recovery button until it clicks.
Recovery mode is initiated.
•
If recovery mode is successfully initiated, the Health indicator light blinks pink and red
repeating. After alternating a few times, the Health indicator light turns solid pink.
232
and red , use a paper clip to