What You'll Need To Set Up The Server - HP EX485 - MediaSmart Server - 2 GB RAM User Manual

HP MediaSmart Server User's Guide
The Front of the Server
The Back of the Server
W Y
HAT OU
One or more open ports on a
be wired to the router. The network connection must support 100
Ethernet).
The router must have
router's documentation for additional information.
4
Light Bar. There is one light bar for each internal
MediaSmart Server. The server can hold up to four disks.
Power Light. The power light is solid aqua white when the server is
turned on.
Network Connection Light. The network connection light is solid aqua
white when the server is connected to the network via a
Health Light. The health light is solid aqua white when the server is
operating correctly.
USB Port. Plug up to four USB 2.0 or later disk drives into the USB
ports to expand your storage space. There is one USB port on the front
and three on the back of the server.
USB Port. Plug up to four USB 2.0 or later disk drives into the USB ports
to expand your storage space. There is one USB port on the front and
three on the back of the server.
eSATA Port. Plug an eSATA (external SATA) hard drive into the eSATA
port to expand your storage space.
Ethernet Port. Connect the HP MediaSmart Server to your network using
an Ethernet cable.
Power Switch. Press to turn the HP MediaSmart Server on.
Power Port. Plug the included AC power cord into the HP MediaSmart
Server.
' N S
LL EED TO
router connected to your network. The HP MediaSmart Server must
DHCP enabled to provide an automatic
SATA
S
ET UP THE ERVER
Mbps to 1000 Mbps (Gigabit
IP address to the server. See your
disk in the HP
router or switch.