Import – From Design Center - Brother PE-DESIGN2.0 Instruction Manual

When you import a file, its contents are added to your current Design Page. You can repeat the
operation and assemble your Design Page from a library of patterns that you have created.
NOTE:
When importing patterns from other makers, make sure to choose a pattern whose size will fit in
the Design Page.
When converted for this application, the colors of patterns imported from
(Pfaff) and
pcs Hus
change the color with the
4
When importing some
this happens, select the import size by clicking the appropriate radio button, then click
import the data.
See also: "Save As" on page 127
Import – from Design Center
Purpose: Imports an embroidery pattern from Design Center.
Shortcut key: F7
Toolbar:
Operation:
1
Start Design Center and open the file that you want to import into Layout & Editing.
2
Click , then
File Import
The dialog displays.
Import size
3
If you are not running Design Center or if it does not contain a
sage will appear.
See also: "Design Center" on page 49
(Husqvarna) files may be slightly changed. When this happens, you can
Sew – Change colors of a stitch object
files from embroidery cards, the
pec
, then from
Design Center
function.
Select Import size
.
Select the magnification factor. You can type it
or increase/decrease it using the arrow but-
tons.
•
The application will not allow you to magnify
the embroidery data to a size such that it
would not fit in your Design Page area.
Select the Orientation by clicking the
radio button opposite the appropriate icon.
tion
Click to import the data.
Import
Click if you want to exit the function.
Cancel
file, the first or the second mes-
pem
(Tajima), (Melco) ,
dst exp
dialog will display. If
to
OK
Orienta-
Click to exit.
OK
125