Open - Brother PE-DESIGN2.0 Instruction Manual

New
Purpose: Creates a new blank Design Page and switches to Stage 2.
Shortcut key: Ctrl
Toolbar:
Operation:
1
Click , then
File New
If the current Design Page is not edited, a new blank Design Page appears immediately.
2
If the current Design Page is edited, you will be asked whether you want to save the changes, for
example:
Depending on the stage you are currently using and the editing you did, the file to be saved is a
file or a
*.pel *.pem
A new file opens automatically in Stage 2. In Stage 2, you can use the pens and erasers to create
black and white drawings. You may also want to use this feature to create patterns that are easier
to draw by hand, for example, free-hand writing.
See also: "Open", "Save" and "Save As" in this section

Open

Purpose: Opens a previously saved file (
2,
*.pem
You can open
Shortcut key: Ctrl
Toolbar:
Operation:
1
Click , then
File Open
A dialog similar to this will display.
Open
+ N
.
file or both.
files open in stage 3 or 4).
and
*.pel *.pem
+ O
.
Click to save the Design Page first.
Yes
Click to abandon the Design Page.
No
Click to do anything else (for exam-
Cancel
ple, modifying the current Design Page or
saving it with another file name).
files open in stage 1,
*.bmp
files created with Version 1.0 of this software.
Select the drive, the folder and the file
name.
•
Be sure to select the right type of file
extensions in
•
If the
Preview
content of the selected file displays in
the preview window.
Click
Open
to open the file in Design Center.
Click
Cancel
files open in stage
*.pel
.
List Files of Type
check box is checked, the
or double-click the file name
to exit.
69