Setting The Regions - Brother PE-DESIGN2.0 Instruction Manual

5
Click on the outline of the pattern to apply the settings (color and stitch type) to the outlines.
Your image now looks like this:
If you think that the outline is still too thick, you can change it now.
6
To change the width of the outline: Click on the outline using the mouse's right button.
The Sewing Attribute Setting dialog displays.
Proceed in the same way as described in point 4 to change the Zigzag width from 1.5 mm to
1 mm.
7
Click on the outlines to apply the new setting.
Your image now looks like this:

Setting the regions

1
Click on the Tool Box.
The shape of the cursor changes to
The Sewing Attributes bar now looks like this:
18
and is displayed together with a small rectangle.