Setting Geometrical Attributes; Arc Shape; Edge Radius - Brother PE-DESIGN2.0 Instruction Manual

Embroidery attributes

Setting Geometrical Attributes

Arc shape

Purpose:
Available:
Operation:
1
Click the Arc shape selector.
The options display.
2
Click one of the options.
The setting applies to all the patterns that you will create in the Circle and Arc Drawing mode until
you change the setting.
See also:

Edge radius

Purpose:
Available:
110
Line sew: Switches the outline on/off. When the outline is
switched off, it is not sewn (and you cannot set its color or
stitch).
Region sew: Switches the inside region on/off. When the
inside region is switched off, it is not sewn (and you cannot set
its color or stitch).
Line color, Region color, Text color, Punch color: Sets the
thread color for outline, region inside, text, manual punching
pattern and imported pattern.
Line sew type: Sets the stitch for the outlines.
Region sew type: Sets the stitch for outline, region inside, text,
manual punching pattern and imported pattern (after the Stitch
to Block function has been applied).
Selects the type of arc.
When you click on the Tool Box to start the Circle and Arc Drawing mode.
"Circle and Arc Drawing Mode" on page 102
Sets the corners of rectangles.
When you click on the Tool Box to start the Rectangle Drawing mode.
When you select an existing rectangle with the cursor in Selection mode.
page 115
page 116
page 117
page 119