HP Elite 7000 - Microtower PC Maintenance And Service Manual page 71

6. Inside of the unit, press the power supply release latch on the chassis base, and then lift up the
rear of the power supply to disengage it from the chassis.
7. Slide the power supply toward the front/bottom of the computer, then lift the power supply out of
the computer.
The following table provides information about power supply cable connectors.
Connector
Main power (24-pin)
CPU power (4-pin)
Hard drive (SATA)
Optical drive (IDE/SATA)
To install the power supply, reverse the removal procedure.
Connector Label
P1
P7
P9
P2 (label on IDE connector; uses IDE/SATA adapter)
Power Supply 63