OnlineSpare
The value for this option determines whether the array specified previously in the script will be
configured with spare drives.
Method mode
Custom
Auto
Logical Drive category
The Logical Drive category has the following options:
"ArrayAccelerator" (page 38)
"LogicalDrive" (page 38)
"LogicalDriveSSPState" (page 38)
"ParityGroups" (page 39)
"PreferredPath" (page 39)
"RAID" (page 39)
"Sectors" (page 39)
"Size" (page 39)
"SSPAdaptersWithAccess" (page 40)
"StripeSize" (page 40)
ArrayAccelerator
This option specifies whether the array accelerator is enabled or disabled for the specified logical
drive. The default value is Enabled.
LogicalDrive
The value that you enter for this option specifies the ID number of the logical drive that is to be
created or modified. The first logical drive on an array must have an ID of 1 (not 0), and logical
drive numbering must be contiguous.
In Configure action mode, ACU accepts only the ID number of the next possible logical drive.
In Reconfigure action mode, ACU also accepts the ID number of any existing logical drive.
LogicalDriveSSPState
This option is valid only for controllers that enable SSP on a logical drive basis. Other controllers
that support SSP use the SSPState option
38
Scripting Toolkit utilities
Possible values
To specify exactly which drives to use as spares,
use the applicable convention (port:ID, box:bay,
or port:box:bay).
To specify only the number of spares (not the
exact IDs), enter that number as the value for this
option. ACU automatically selects only those
drives that are suitable for the array.
To specify that the array should not have spares,
enter None.
Yes (indicating one spare)
No
Default value
In Configure action mode: None.
In Reconfigure action mode, ACU ignores any
value entered for this option and keeps any spares
that are already present in the configuration.
In Configure action mode: Yes (indicating one
spare).
In Reconfigure action mode, ACU ignores any
value entered for this option and keeps any spares
that are already present in the configuration.
(page
36).