HP Compaq nc4010 - Notebook PC Maintenance And Service Manual page 33

Troubleshooting
Select
Device Options
(continued)
HDD Self Test Options
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
2–6
Table 2-3
Advanced Menu (Continued)
To Do This
■
Change the parallel port mode from
Enhanced Parallel Port (EPP, the default
setting) to standard, bi-directional EPP, or
Enhanced Capabilities Port (ECP).
■
Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■
Enable/disable all settings in the Intel
SpeedStep window. (When Disable is
selected, the notebook runs in Battery
Optimized mode.)
■
Specify how the notebook recognizes
multiple identical Port Replicators that are
identically equipped. Select Disable to
recognize the Port Replicators as a single
Port Replicator; select Enable to recognize
the Port Replicators individually, by serial
number.
■
Enable/disable the reporting of the processor
serial number by the processor to the
software.
Run a quick comprehensive self test on hard
drives in the system that support the test
features.
Maintenance and Service Guide