Selecting From The File Menu - HP Compaq nc4010 - Notebook PC Maintenance And Service Manual

3. To close Computer Setup and restart the notebook:
❏
or
–
❏
4. When you are prompted to confirm your action, press

Selecting from the File Menu

Select
System Information
Save to Floppy
Restore from Floppy
Restore Defaults
Ignore Changes and Exit
Save Changes and Exit
Maintenance and Service Guide
Select File > Save Changes and Exit and press
–
Select File > Ignore Changes and Exit and press
To Do This
■
■
Save system configuration settings to a diskette.
Restore system configuration settings from a
diskette.
Replace configuration settings in Computer
Setup with factory default settings. Identification
information is retained.
Cancel changes entered during the current
session, then exit and restart the notebook.
Save changes entered during the current
session, then exit and restart the notebook.
Table 2-1
File Menu
View identification information about the
notebook, a Port Replicator, and any battery
packs in the system.
View specification information about the
processor, memory and cache size, and
system ROM.
Troubleshooting
enter.
enter.
F10.
2–3