Installing The Needle Sub Plate - Brother LK3-B434E MKII Instruction Manual

3. INSTALLATION

3-20. Installing the needle sub plate

q
t
e
!0
i
o
o
17
w
r
y
i
!0
u
LK3-B434E Mark II
1. Install the four needle sub plate supports q with
the four screws w.
2. Insert the needle sub plate e from the front of the
machine so that it is level.
NOTE:
Insert the needle sub plate e so that the X feed lever
cap r sits on top of the needle sub plate e.
3. Install the needle sub plate e with the four screws
t.
4. Loosen the screws w and make fine adjustments
to the height of the needle sub plate e so that it is
at the same height as the needle plate y.
5. Provisionally secure the two auxiliary plate sup-
ports u with the washers i and the screws o
and !0 , and then firmly tighten the screws o and
! 0 in that order.