Installing The Motor Cover; Installing The Spool Stand - Brother LK3-B434E MKII Instruction Manual

3-18. Installing the motor cover

t

3-19. Installing the spool stand

q
w
r
e
u
y
q
LK3-B434E Mark II
1. Install the motor cover q to the motor back cover
w with the screws e and the flat washers r.
2. Pass the motor shaft through the notch in the mo-
tor back cover w, and then tighten the screws y
and the washers u so that the clearance between
the motor pulley t and the motor cover q is
uniform.
Assemble the spool stand q while referring to the
spool stand instruction manual, and then install the
spool stand q at the right side of the work table.
3. INSTALLATION
16