Brother LK3-B430 Service Manual
Service manual
Hide thumbs
Also See for LK3-B430:
- Instruction manual (48 pages) ,
- Parts manual (60 pages) ,
- User manual (46 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Need help?
Do you have a question about the LK3-B430 and is the answer not in the manual?
Questions and answers
Mohon bantuannya.. mesin bartex brother Lk3-B430E-2 error E7...kipas pendingin hidup masih tetap error E7... mohon bantuannya.. trimakasih
Error E7 on the Brother LK3-B430E-2 sewing machine indicates a problem with the thread trimmer mechanism. Specifically, it means the thread trimming operation did not complete properly or the thread trimmer did not return to its original position.
Common causes include:
- Thread jam in the trimmer area.
- Faulty or misaligned thread trimming knife or mechanism.
- Sensor issue detecting the position of the trimmer.
- Electrical or motor problem related to the trimmer.
To fix the issue:
1. Turn off the machine.
2. Check and clear any thread or lint in the trimming area.
3. Inspect the trimmer knife for damage or misalignment.
4. Restart the machine to reset the error.
5. If the problem persists, the machine may need service.
This answer is automatically generated
Potrebujem navodila za servisiranje LK3-B438-2