Intel S5520HCR Configuration Manual page 7


The server system is designed to work with Intel
or with Intel® Xeon® processor 5600 series with 130W maximum power, and is compatible with boxed
STS100C (Combo) or STS100A (Active) heat sink.
10)
®
The Intel Workstation System SC5650SCWS includes:

®
Intel Workstation Board S5520SC pre-installed in the Intel

Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.

Non-redundant 1000W high efficiency PFC power supply

Three non-redundant fixed cooling fan with ducting

Quick Start User's Guide and Configuration Label

Cables (one each)
o
Front Panel Cable (baseboard header to front panel, pre-routed))
o
USB Cable (USB header to chassis front panel, pre-routed)
o
Adapter Cable providing two additional SATA power connectors (in cable kit)
o
AC power cord is only included in SC5650SCWSNA

Chassis intrusion switch assembly (pre-routed)

The workstation system is designed to work with Intel
130W maximum power, and is compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
11)
Common accessories include:
Hot Swap Drive Bays:
–
AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS module or SAS RAID card.
–
AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS module or SAS RAID card. Only supported in Intel
SC5600BRP, and SC5600LX.
–
AXX6DRV3GR: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS module or SAS RAID Card. Support 6Gb
SAS Hard Drives with compatible 6Gb SAS adapters
–
AXX4DRV3GR: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS module or SAS RAID Card. Only
supported in Intel
compatible 6Gb SAS adapters.
AXX750WPS: Spare 750W power supply module for Intel
ARIGRACK: Rack conversion kit (SC5600BASE, SC5600BRP and SC5600LX)
APP3RACKIT: Rack conversion kit (SC5600 chassis family).
®
AXXRAKSW5: Intel RAID Activation Key AXXRAKSW5 to enable Intel Embedded RAID technology II for SAS
and/or SATA Software RAID 5 on S5520HC, S5500HCV, and S5520SC boards.
APPT600WHPSU: Additional 600W power supply module- required for full redundancy for SC5650BRP only.
APPTHSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GR
APP3HSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GEXP.
AXX25DRVADPTR: 2.5" hard drive carrier kit for installing 2.5" SATA or SAS hard drive or Solid State Drive into 3.5"
hot swap drive bay
®
Server Chassis SC5600BRP and SC5600LX. Support 6Gb SAS Hard Drives with
® ®
Xeon processor 5500 series with 95W maximum power
®
Sever Chassis SC5650WS
® ®
Xeon processor 5500 series & 5600 series with
®
Server Chassis SC5600LX and SC5600BRP
7
®
Server Chassis