Selecting A Stitch Pattern; Using The Mirror Image Key; Using The Image Key - Brother Innov-ís 2800D User Manual

Selecting a Stitch Pattern

a
Turn on the machine, and then lightly press
the display.
→ Depending on the setting, either "1-01 Straight stitch
(Left)" or "1-03 Straight stitch (Middle)" is
automatically selected.
b
Press
the stitches in the selected category, and then
select a stitch pattern.
* If a different screen is displayed, press
→ An image of the selected stitch pattern is displayed
below the symbol of the appropriate presser foot.
Memo
For details on the stitch patterns, refer to the "STITCH
SETTING CHART" at the end of this manual.

■ Using the Mirror Image Key

Press so that it appears as
image of the selected stitch pattern is created.
Note
If appears as
multi-directional sewing patterns, etc.) is selected, a
mirror image of the selected stitch cannot be created.
to display a screen of
.
. A mirror
after a stitch (buttonholes,
SELECTING A UTILITY STITCH

■ Using the Image Key

You can display an image that is an approximate
size of the selected stitch. You can also check and
change the colors of the image on the screen.
a
Press .
→ An image of the selected stitch is displayed.
b
Press to change the thread color of the
stitch on the screen.
Memo
• The color changes every time you press
• The units of the stitch display area are in mm.
a Stitch screen
3
.
51