Automatic Thread Cutting (End Color Trim); If The Upper Thread Is Too Tight; If The Upper Thread Is Too Loose - Brother Innov-ís 2800D User Manual

ADJUSTMENTS DURING THE EMBROIDERY PROCESS

■ If the Upper Thread Is Too Tight

The upper thread is too tight when the bobbin
thread is visible from the right side of the fabric.
Right side of fabric
a
Press
b
Press in the tension display.
* Each press of the key decreases the value and
weakens the upper thread tension.
c
Press
150
Wrong side of fabric
.
.

■ If the Upper Thread Is Too Loose

The upper thread is too loose when there are loose
thread locks or when loops appear on the right side
of the fabric.
Right side of fabric
a
Press .
b
Press in the tension display.
* Each press of the key increases the value and
tightens the upper thread tension.
c
Press .
Automatic Thread Cutting (End Color
Trim)
If the automatic thread cutting setting is selected, the
machine will automatically cut the thread at the end of
each color step sewn. To cancel the setting, press
, and then press
.
Wrong side of fabric
again so that it appears as