Brother Innov-ís 2800D User Manual page 207

This message is displayed when
is pressed without an
embroidery card inserted.
This message is displayed when
the "Start/Stop" button is pressed
while the foot controller is
connected.
This message is displayed when
the motor locks up due to tangled
thread or for other reasons related
to thread delivery.
This message is displayed when
you attempt to select a pattern
after the USB media in which the
pattern is saved has been
changed.
This message is displayed when
the Utility Stitch key or Character/
Decorative Stitch key is pressed
while the embroidery unit is
attached.
ERROR MESSAGES
This message is displayed when
the "Reverse/Reinforcement Stitch"
button is pressed while the
embroidery unit is attached.
This message is displayed when
the machine is in embroidery edit
mode, and you try to use an editing
function when the pattern is not
completely within the red outline.
This message is displayed when
is pressed while an
incompatible embroidery card is
inserted.
This message is displayed when an
embroidery frame not for use with
this machine is attached while the
embroidery unit is attached.
This message is displayed when
the machine is set for twin needle
sewing and a pattern that cannot
be sewn with the twin needle is
selected.
8
205