Attaching The Embroidery Frame; Removing The Embroidery Frame - Brother Innov-ís 2800D User Manual

ATTACHING THE EMBROIDERY FRAME

Note
Before attaching the embroidery frame, set the bobbin.
a
Press the "Presser Foot Lifter" button to raise
the presser foot.
b
Raise the frame-securing lever.
a
a Frame-securing lever
c
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
a
a Embroidery frame holder
b Embroidery frame guide
d
Slide the embroidery frame into the holder,
making sure that
aligns with on the holder.
a Arrows
b
on the embroidery frame
a

ATTACHING THE EMBROIDERY FRAME

e
Lower the frame-securing lever so that it is level
with the frame to secure the embroidery frame
in the embroidery frame holder.
CAUTION
• If the frame-securing lever is not lowered, the
embroidery pattern may not sew out correctly or the
presser foot may strike the embroidery frame and
cause injury.
f
After the embroidery frame is attached, press
the "Presser Foot Lifter" button again to
lower the presser foot.

■ Removing the Embroidery Frame

a
Press the "Presser Foot Lifter" button to raise
the presser foot.
b
Raise the frame-securing lever.
c
Pull off the embroidery frame toward you.
5
133