Embroidering A Pattern - Brother Innov-ís 1250D Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Embroidering a pattern

Embroidery patterns are embroidered with a change
of thread after each color.
a Prepare embroidery thread of the color shown
on the screen.
a
b
a Embroidery frames that can be used for
embroidering
b Current color step/Number of colors in design
c Current name of color
d Current color part
e Next color part
• The thread color number set displayed for the
thread colors can be changed. Press
(Settings key), and then change the setting in
the settings screen. For details, refer to "LCD
(liquid crystal display) operation" (page 160).
c
d e
Example: Embroidery thread number selected
b Set the embroidery thread, and thread the
needle.
• Refer to "Threading the upper thread" (page
32) and "Threading the needle" (page 34).
Note
Before using the needle threader, be sure to
lower the presser foot.
c
Pass the thread through the embroidery foot
hole, and hold it lightly in your left hand.
Give the thread a little slack.
CAUTION
If the thread is pulled too tight, the needle
may break or bend.
Do not let hands or objects hit the
carriage while sewing. The pattern may
misalign.
Embroidering 167
4